Draw Bar Kit Steel Handwheel & Threaded Draw Bar with 1/4"x20TPI Thread Around 20"(50cm) Length for Woodturning Lathe Spindle.
- Suitable for lathe spindle. Insertion tools with Morse cone/Morse cone require pressure to prevent vibration. 1/4\x20TPI Thread for fitting morse cone which has a suitable threaded support.
- With the help of the safety rod the drill bit on the spindle of the lathe can be prevented from loosening.
- The use of a drill feeder on the spindle of a lathe is ideal for example when machining small workpieces or when receiving polishing abrasives.
- To prevent injury the theaded rod must be cut to length before powering on your lathe.
- Simply install the drawbar system on your lathe while it is unplugged then cut the rod with a hacksaw so no more than 2\ of rod extends past the collet chuck handwheel. Remove any sharp burrs with a file.
