IN STOCK

Heavy Duty Drill Chuck holds drill bits, pen mandrel shafts, and workpieces up to 5/8 inch in diameter. Designed Inner Thread 3/8"X16TPI and 1/4"x20TPI on Arbor, when use the drill chuck in the headstock of the lathe, it can be secured against loosening, using...

3" diameter wood lathe faceplate, 1" x 8TPI Thread, 0.4" thick steel faceplate with Woodworm screw Two nylon washers provide a small non-stick buffer between contacting metal surfaces without affecting mount accuracy. The lathe face plate features 4 screw mounting holes,equipped with 3 woodworm...

The NCK series jaws are designed for BMWOOD NCK series chucks NCK-3.75ZN, NCK-G3.75, NCK-4M and also compatible with the chucks: SuperNOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4. (All listed chucks require our NCK-JS8-M6 M6x12mm jaw fixing screws to be...

The Dovetail Jaws for CK-3.75Z Series Woodturning Lathe Chuck are compatible with the Harbor Freight Bauer 23222A-B chuck directly, and also compatible with Vicmarc VM100, Record RP4000 but required our CK-JS8-M5 M5x12mm jaw fixing screws to be used.  

The Extended Dovetail Jaws for CK-3.75Z Series Woodturning Lathe Chuck are compatible with the Harbor Freight Bauer 23222A-B chuck directly, and also compatible with Vicmarc VM100, Record RP4000 but required our CK-JS8-M5 M5x12mm jaw fixing screws to be used. These extended dovetail jaws are...

Heavy Duty Drill Chuck holds drill bits, pen mandrel shafts, and workpieces up to 5/8 inch in diameter. Designed Inner Thread 3/8"X16TPI and 1/4"x20TPI on Arbor, when use the drill chuck in the headstock of the lathe, it can be secured against loosening, using...

The tool rests feature a 2/5"(1CM) hardened steel rod as the tool bearing surface that provides smooth tool transition and will never ding, nick or need filing. Your hand fits comfortably in the radius of the rest, whether you use an overhand or underhand...

The tool rests feature a 2/5"(1CM) hardened steel rod as the tool bearing surface that provides smooth tool transition and will never ding, nick or need filing. Your hand fits comfortably in the radius of the rest, whether you use an overhand or underhand...

The 8" Flat Jaws for CK-3.75Z Series Woodturning Lathe Chuck are compatible with the Harbor Freight Bauer 23222A-B chuck directly, and also compatible with Vicmarc VM100, Record RP4000 but required our CK-JS8-M5 M5x12mm jaw fixing screws to be used. These button jaws are designed...

The step jaws are designed primarily to grip in the contracting mode, the base (foot) of footed bowls. The step sizes provide optimum gripping for three foot sizes with minimal crush damaged wood. There is also an expanding dovetail made for alternative recess gripping...

Carbide Tipped Detailer Chisel For Woodturning with 28mm x 10mm Diamond TCT blade WCS-T-R-15/2 Fits the BMWOOD M2048T Finisher Chisel as well as comparable brands that accept 15mm Round and 2.5mm thick inserts with M5X10 screw.   WCS-T-SQ-15X15/2 Fits the BMWOOD M2049T Rougher as...

Carbide Tipped Radius Rougher Chisel For Woodturning with Arc Square TCT Blade 11x11mm. Carbide tipped chisel is perfect for the serious wood turner who takes pride in their tools and the work they produce with them. Once one of the edges dulls just rotate...

Carbide Tipped Finisher Chisel For Woodturning with Round TCT blade 12mm. WCS-T-R-15/2 Fits the BMWOOD M2048T Finisher Chisel as well as comparable brands that accept 15mm Round and 2.5mm thick inserts with M5X10 screw.   WCS-T-SQ-15X15/2 Fits the BMWOOD M2049T Rougher as well as...

Carbide Tipped Rougher Chisel For Woodturning with Square TCT blade 11x11mm. WCS-T-R-15/2 Fits the BMWOOD M2048T Finisher Chisel as well as comparable brands that accept 15mm Round and 2.5mm thick inserts with M5X10 screw.   WCS-T-SQ-15X15/2 Fits the BMWOOD M2049T Rougher as well as...

Designed to fit in most 4 jaw chucks eliminating the need to remove the chuck every time you need of use this center. 2 Pcs Lathe Chuck Spur Drive Set 3/4" & 1" Multi Point Crown Type with Spring Loaded Center to mount into...

The NCK series jaws are designed for BMWOOD NCK series chucks NCK-3.75ZN, NCK-G3.75, NCK-4M and also compatible with the chucks: SuperNOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4. (All listed chucks require our NCK-JS8-M6 M6x12mm jaw fixing screws to be...

CK series Jaws designed for BMWOOD CK100 series Chuck are compatible with the Harbor Freight Bauer 23222A-B chuck completely, and also compatible with Vicmarc VM100, Record RP4000 but required our CK-JS8-M5 M5x12mm jaw fixing screws to be used.

CK series Jaws designed for BMWOOD CK100 series Chuck are compatible with the Harbor Freight Bauer 23222A-B chuck completely, and also compatible with Vicmarc VM100, Record RP4000 but required our CK-JS8-M5 M5x12mm jaw fixing screws to be used.  

The NCK series jaws are designed for BMWOOD NCK series chucks NCK-3.75ZN, NCK-G3.75, NCK-4M and also compatible with the chucks: SuperNOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4. (All listed chucks require our NCK-JS8-M6 M6x12mm jaw fixing screws to be...

CK series Jaws designed for BMWOOD CK100 series Chuck are compatible with the Harbor Freight Bauer 23222A-B chuck completely, and also compatible with Vicmarc VM100, Record RP4000 but required our CK-JS8-M5 M5x12mm jaw fixing screws to be used.