-
3/4"X16 TPI Female to 1"X8TPI Male Thread Adaptor, Woodworking Lathe Headstock Spindle Adaptor with Two Nylon Washers.
The wood lathe thread adaptors enable you to use an insert system rather than have to invest in entirely new chucks or new accessories for your lathe thread sizes. Anti-rust coating surface Greatly extend the service life Extensive use The adaptors accept chucks, faceplates, and...- $26.99 USD
$26.99 USD- $26.99 USD
- Unit price
- per
-
3PCS Carbide Wood Lathe Turning Tool Set, Carbide Wood Lathe Chisel Set, Carbide Lathe Turning Tool, Carbide Turning Tool
Excellent sharpness and toughness M2 cryogenically treated high speed steel blade with hardness 65HRC. Excellent sharpness and toughness, suitable for hardwood turning Woodturning carbide tipped chisel Wood turning tools can be rotated or replaced to provide a fresh cutting edge whenever needed. Beech...- $29.99 USD
$66.74 USD- $29.99 USD
- Unit price
- per
-
3PCS M2 Cryogenically Treated Steel Chisel set including Roughing Gouge, Spindle Gouge and Skew Chisels for WoodLathe,Woodturning Tools.
Excellent sharpness and toughness M2 cryogenically treated high speed steel blade with hardness 65HRC. Excellent sharpness and toughness, suitable for hardwood turning Woodturning carbide tipped chisel Wood turning tools can be rotated or replaced to provide a fresh cutting edge whenever needed. Beech handle...- $54.39 USD
$74.39 USD- $54.39 USD
- Unit price
- per
-
3pcs set 4 Prong Drive Centre with Interchangable Centre Points for CK & NCK chuck series, Compatible with chucks Super NOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4.
Turn spindles without removing your chuck from the lathe using this four prong drive centre. The centre point insert is removable and can be replaced by a threaded pin or a blank 8mm diameter pin used for long hole boring which is also supplied....- $29.99 USD
$29.99 USD- $29.99 USD
- Unit price
- per
-
4" Faceplate with Thread 1"x8TPI, with Two Nylon Washers for Woodturning Lathe,12 Mounting Holes.
The 4" wood lathe steel faceplate is made of No.45 hard steel for greatly extending the service life. 1"x8TPI thread is compatibile with the majority of wood lathes on the market. A flat-cut surface on the tail for easily install and disassemble (Wrench not...- $19.45 USD
$19.45 USD- $19.45 USD
- Unit price
- per
-
4" Faceplate with Thread 1-1/4"x8TPI, with Two Nylon Washers for Woodturning Lathe.
The 4" wood lathe steel faceplate is made of No.45 hard steel for greatly extending the service life. 1-1/4"x8TPI thread is compatibile with the majority of wood lathes on the market. A flat-cut surface on the tail for easily install and disassemble (Wrench not...- $19.45 USD
$19.45 USD- $19.45 USD
- Unit price
- per
-
4" Large Deep Box Support Tool Rest with M10X1.5 thread for Guiding Scrapers and Other Digging Tools.
Brand BMWOOD Material steel Manufacturer BMWOOD- $27.99 USD
$27.99 USD- $27.99 USD
- Unit price
- per
-
4" Tool Rest with 1" Diameter 4" Length Post, Woodlathe Heavy Duty Round Bar Straight Tool Rest.
The tool rests feature a 2/5"(1CM) hardened steel rod as the tool bearing surface that provides smooth tool transition and will never ding, nick or need filing. Your hand fits comfortably in the radius of the rest, whether you use an overhand or underhand...- $27.99 USD
$32.99 USD- $27.99 USD
- Unit price
- per
-
4" Wood Screw Chuck with Thread 1"x8TPI
4" Steel wood lathe faceplate,the 0.4" thick steel faceplate makes it even more durable. With 8 screw mounting holes, equipped with 2 sets of screws and 2 wood screws,easy to mount to the workpiece. The face plates for wood lathe is designed to fit...- $25.99 USD
$25.99 USD- $25.99 USD
- Unit price
- per
-
4-Prong Spring-Loaded 5/8" Spur Drive Center 2MT for Woodlathe Woodturning Tools
4 prong drive center is the most common method of driving a workpiece between centers on the lathe.Sharp spurs give a strong bite into wood work piece. The 5/8" diameter of the center provides a strong grip so you can turn your piece without...- $15.99 USD
$15.99 USD- $15.99 USD
- Unit price
- per
-
4-Prong Spring-Loaded Spur Drive Center 2MT with 1" Diameter for Woodlathe Woodturning Tools.
4 prong drive center is the most common method of driving a workpiece between centers on the lathe.Sharp spurs give a strong bite into wood work piece. The 1" diameter of the center provides a strong grip so you can turn your piece without...- $16.99 USD
$16.99 USD- $16.99 USD
- Unit price
- per
-
4PCS Carbide Tipped Chisel Set with 10X10mm Chisel Bar and 320mm Beech Handle
Excellent sharpness and toughness M2 cryogenically treated high speed steel blade with hardness 65HRC. Excellent sharpness and toughness, suitable for hardwood turning Woodturning carbide tipped chisel Wood turning tools can be rotated or replaced to provide a fresh cutting edge whenever needed. Beech...- $58.79 USD
$78.79 USD- $58.79 USD
- Unit price
- per
-
5/8" Dia Post 4pcs Set Straight Horizontal Support Tool Rest for Woodturning Lathe.
Ultra smooth, round hardened steel rod top will let you effortlessly glide your chisel or other lathe tool for superior results. This set includes four different lengths straight tool rests: 3-1/2", 6", 9",12". Different lengths for the different jobs. Tool rest is suitable for...- $65.99 USD
$65.99 USD- $65.99 USD
- Unit price
- per
-
5/8" Dia Stem Glide Bowl Turner's 4-Piece Toolrest Set for Woodlathe Bowl Turning.
Reach far into the interior of bowls with ease with these 4 invaluable toolrests. These comfortable, ergonomically designed toolrests that will provide you all-day turning support. With the unique concave design, your fingers will fit snuggly on the rest and let you get closer...- $56.99 USD
$58.99 USD- $56.99 USD
- Unit price
- per
-
5/8" Post for Wood Lathe Tool Rest with 82MM Total Length Including M10X1.5 Thread
The round tool rest post provides the smooth surface for gliding your tools across your project. Stem post diameter is 5/8" with Total length 82mm. Interchangeable toolrest post screw into rests and can easily be removed and attached to a different tool rest bar....- $16.55 USD
$16.55 USD- $16.55 USD
- Unit price
- per
-
5/8" Shopsmith Female to 1" x 8TPI Male Thread Adaptor, Woodworking Lathe Headstock Spindle Adaptor with Two Nylon Washers.
The wood lathe thread adaptors enable you to use an insert system rather than have to invest in entirely new chucks or new accessories for your lathe thread sizes. Anti-rust coating surface Greatly extend the service life Extensive use The adaptors accept chucks, faceplates, and...- $26.99 USD
$26.99 USD- $26.99 USD
- Unit price
- per
-
6" Faceplate with 1-1/4"x8TPI Thread,with Two Nylon Washers for Woodturning Lathe.
The 6" wood lathe steel faceplate is made of No.45 hard steel for greatly extending the service life. 1-1/4"x8TPI thread is compatibile with the majority of wood lathes on the market. A flat-cut surface on the tail for easily install and disassemble (Wrench not...- $39.45 USD
$39.45 USD- $39.45 USD
- Unit price
- per
-
6" Faceplate with Thread 1”X8TPI, with Two Nylon Washers for Woodturning lathe,12 Mounting Holes.
The 6" wood lathe steel faceplate is made of No.45 hard steel for greatly extending the service life. 1”x 8 TPI thread is compatibile with the majority of wood lathes on the market. A flat-cut surface on the tail for easily install and disassemble...- $39.45 USD
$39.45 USD- $39.45 USD
- Unit price
- per
-
6" Tool Rest with 1" Diameter 4" Length Post, Woodlathe Heavy Duty Round Bar Straight Tool Rest.
The tool rests feature a 2/5"(1CM) hardened steel rod as the tool bearing surface that provides smooth tool transition and will never ding, nick or need filing. Your hand fits comfortably in the radius of the rest, whether you use an overhand or underhand...- $35.99 USD
$35.99 USD- $35.99 USD
- Unit price
- per
-
6" Tool Rest with 5/8" (16mm) Diameter 82mm Length Post, Woodlathe Heavy Duty Round Bar Straight Tool Rest.
The tool rests feature a 2/5"(1CM) hardened steel rod as the tool bearing surface that provides smooth tool transition and will never ding, nick or need filing. Your hand fits comfortably in the radius of the rest, whether you use an overhand or underhand...- $35.99 USD
$35.99 USD- $35.99 USD
- Unit price
- per
Popular Products
NCK-4M 4" 4 Jaw Mini Self-Centering Chuck, Thread 1"X8TPI, with NCK-3.75Z-DJDD Dovetail Jaws, Wood Screw, Two Nylon Washers, T Handle Allen
- $52.99 USD
$52.99 USD- $52.99 USD
- Unit price
- / per
4 reviews
NCK-G3.75 3.75" 4 Jaw Key Self-Centering Chuck, Thread 1"X8TPI, with NCK-3.75Z-DJDD Dovetail Jaws, Wood Screw, Two Nylon Washers, T Handle Allen Key
Jaws are compatible with the chucks: Super NOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4.(All listed chucks require our NCK-JS8-M6 M6x12mm jaw fixing screws to be used) The tightening mechanism provides additional grip strength to the workpiece. The dovetail jaw...
- $69.99 USD
$69.99 USD- $69.99 USD
- Unit price
- / per
No reviews
NCK-3.75ZN Woodturning 3-3/4" Self Centering Chuck with 1”x 8 TPI direct thread, locking set screws for reverse turning
Brand BMWOOD Compatible Devices Lathe Thread Size 1”x 8 TPI direct thread Included Components 3-3/4" Self Centering Chuck, Dovetail Jaw and Woodworm Screw Jaws are compatible with the chucks: Super NOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4. Scroll chuck...
- $85.55 USD
$85.55 USD- $85.55 USD
- Unit price
- / per
No reviews
NCK-3.75ZN/S1 Wood Lathe Chuck 3-3/4" Self Centering Chuck Set 1”x 8TPI Direct Thread with locking set screws for reverse turning
Feature 1: Special Designed Bottom Jaw Jaws for the CK-3.75ZNS1 are compatible with the following chucks: SuperNOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4 Feature 2:Two sets locking holes for reversing running The design of the locking hole takes into...
- $165.95 USD
$185.95 USD- $165.95 USD
- Unit price
- / per
2 reviews
NCK-3.75Z-SJ Step Jaws for Woodturning Lathe Chuck
The NCK series jaws are designed for BMWOOD NCK series chucks NCK-3.75ZN, NCK-G3.75, NCK-4M and also compatible with the chucks: SuperNOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4. (All listed chucks require our NCK-JS8-M6 M6x12mm jaw fixing screws to be...
- $30.38 USD
$30.38 USD- $30.38 USD
- Unit price
- / per
No reviews
Sidebar
Recently Viewed Products
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
- Choosing a selection results in a full page refresh.