-
NCK-3.75Z-SJ Step Jaws for Woodturning Lathe Chuck
The NCK series jaws are designed for BMWOOD NCK series chucks NCK-3.75ZN, NCK-G3.75, NCK-4M and also compatible with the chucks: SuperNOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4. (All listed chucks require our NCK-JS8-M6 M6x12mm jaw fixing screws to be...- $30.38 USD
$30.38 USD- $30.38 USD
- Unit price
- per
-
CK-3.75Z-RJTT Round Jaws for CK-3.75Z Series Woodturning Lathe Chuck, Compatible with the Harbor Freight Bauer 23222A-B Chuck.
CK series Jaws designed for BMWOOD CK100 series Chuck are compatible with the Harbor Freight Bauer 23222A-B chuck completely, and also compatible with Vicmarc VM100, Record RP4000 but required our CK-JS8-M5 M5x12mm jaw fixing screws to be used.- $30.13 USD
$30.13 USD- $30.13 USD
- Unit price
- per
-
NCK-3.75Z-RJTT Round Jaws with Tooth in Both Side for Woodlathe Woodturning Chuck.
The jaws are compatible with the chucks: SuperNOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4. (All listed chucks require our NCK-JS8-M6 M6x12mm jaw fixing screws to be used)- $30.13 USD
$30.13 USD- $30.13 USD
- Unit price
- per
-
Crown Revolving Live Center MT2 3/4" Diameter for Woodturning Lathe Tailstock Center
Revolving live center for supporting work when turning "between centers" on the lathe. Revolving 3/4" diameter spur point which will not split your workpiece. Allows more freedom in re-positioning the tailstock on your piece. The Live Center is compatible with tailstock with taper 2MT....- $29.99 USD
$29.99 USD- $29.99 USD
- Unit price
- per
-
3pcs set 4 Prong Drive Centre with Interchangable Centre Points for CK & NCK chuck series, Compatible with chucks Super NOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4.
Turn spindles without removing your chuck from the lathe using this four prong drive centre. The centre point insert is removable and can be replaced by a threaded pin or a blank 8mm diameter pin used for long hole boring which is also supplied....- $29.99 USD
$29.99 USD- $29.99 USD
- Unit price
- per
-
2" Steel Wood Lathe Faceplate with Screwchuck and Two Nylon washers, Fit for 1" x 8TPI Spindle Woodturing Lathe.
2" diameter wood lathe faceplate,1" x 8TPI Thread, 0.4" thick steel faceplate. The lathe face plate features 4 screw mounting holes,equipped with 3 wood screws, making it quick and easy to install your workpiece securely. Experience reliable performance and a long service life with...- $29.99 USD
$29.99 USD- $29.99 USD
- Unit price
- per
-
CK-3.75Z-6034 Pen Plus Jaws for Woodturning Lathe Chuck, Compatible with the Harbor Freight Bauer 23222A-B Chuck.
CK series Jaws designed for BMWOOD CK100 series Chuck are compatible with the Harbor Freight Bauer 23222A-B chuck completely, and also compatible with Vicmarc VM100, Record RP4000 but required our CK-JS8-M5 M5x12mm jaw fixing screws to be used. Solid, long design that the Pen...- $29.99 USD
$29.99 USD- $29.99 USD
- Unit price
- per
-
Woodlathe MT2 Centers set, Live Center 1-5/8" Dia and Crown Drive Center 1" Dia
MT1 and MT2 Center sets: LC5+DC2/MT2 Live Center 1-5/8" Dia + Crown Drive Center 1" Dia LC5+DC4/MT2 Live Center 1-5/8" Dia + 4 Pronged Drive Center 1" Dia LC5+DC2/MT1 Live Center 1-1/4" Dia + Crown Drive Center 1/2" Dia LC5+DC2/MT2 Live Center 1 5/8"...- $29.95 USD
$39.99 USD- $29.95 USD
- Unit price
- per
-
CK-3.75Z-PJ Pin Jaws for CK-3.75Z Series Woodturning Lathe Chuck, Compatible with the Harbor Freight Bauer 23222A-B chuck.
The Pin Jaws for CK-3.75Z Series Woodturning Lathe Chuck are compatible with the Harbor Freight Bauer 23222A-B chuck directly, and also compatible with Vicmarc VM100, Record RP4000 but required our CK-JS8-M5 M5x12mm jaw fixing screws to be used. These pin jaws have both a...- $29.81 USD
$29.81 USD- $29.81 USD
- Unit price
- per
-
DEC350 Woodturning Double Ended Bowl Calipers Stainless Steel, Woodworking Caliper Tools.
The Woodturning Calipers Tools is designed for accurately measuring wall thicknesses and diameters in hollow forms and bowls. Double-ended design for easy and accurate measurements, transferring readings from one end to the other without removing the calipers. Made of stainless steel for durability. Connected...- $28.99 USD
$28.99 USD- $28.99 USD
- Unit price
- per
-
Crown Revolving Live Center MT1 1/2" Diameter for Woodturning Lathe Tailstock Center.
Revolving live center for supporting work when turning "between centers" on the lathe. Revolving 3/4" diameter spur point which will not split your workpiece. The Live Center is compatible with tailstock with taper 1MT. Made of No.45 Steel with internal roller bearings for smooth...- $28.99 USD
$28.99 USD- $28.99 USD
- Unit price
- per
-
OIC430 Woodturning Double Ended Bowl Calipers Stainless Steel, Woodworking Caliper Tools.
The Woodturning Calipers Tools is designed for accurately measuring wall thicknesses and diameters in hollow forms and bowls. Double-ended design for easy and accurate measurements, transferring readings from one end to the other without removing the calipers. Made of stainless steel for durability. Connected...- $28.99 USD
$28.99 USD- $28.99 USD
- Unit price
- per
-
4" Large Deep Box Support Tool Rest with M10X1.5 thread for Guiding Scrapers and Other Digging Tools.
Brand BMWOOD Material steel Manufacturer BMWOOD- $27.99 USD
$27.99 USD- $27.99 USD
- Unit price
- per
-
Super Heavy Duty 5/8" Keyless Drill Chuck with MT2 Shank for Woodlathe and Pillar drills
BMWOOD Super Heavy Duty 5/8" Drill Chuck with MT2 Shank and Chuck Key for Wood lathe and drill press Heavy Duty Drill Chuck includes the 5/8"(16mm) drill chuck, #2 Morse Taper Arbor and Jaw Tightening Key. The drill chuck can be installed on the...- $27.45 USD
$30.45 USD- $27.45 USD
- Unit price
- per
-
Pen Mandrel with 1"X8TPI Thread Adaptor for Woodlathe Woodturning Pen Make.
- $26.99 USD
$26.99 USD- $26.99 USD
- Unit price
- per
-
Draw Bar Kit Steel Handwheel & Threaded Draw Bar with 1/4"x20TPI Thread Around 20"(50cm) Length for Woodturning Lathe Spindle.
Suitable for lathe spindle. Insertion tools with Morse cone/Morse cone require pressure to prevent vibration. 1/4"x20TPI Thread for fitting morse cone, which has a suitable threaded support. With the help of the safety rod, the drill bit on the spindle of the lathe can...- $26.99 USD
$26.99 USD- $26.99 USD
- Unit price
- per
-
Draw Bar Kit Steel Handwheel & Threaded Draw Bar with 3/8"x16TPI Thread Around 20"(50cm) Length for Woodturning Lathe Spindle.
Suitable for lathe spindle. Insertion tools with Morse cone/Morse cone require pressure to prevent vibration. 3/8"x16TPI Thread for fitting morse cone, which has a suitable threaded support. With the help of the safety rod, the drill chuck or other tools on the spindle of...- $26.99 USD
$26.99 USD- $26.99 USD
- Unit price
- per
-
M33X3.5 Female to 1"X8TPI Male Thread Adaptor, Woodworking Lathe Thread Adaptor with Two Nylon Washers.
The wood lathe thread adaptors enable you to use an insert system rather than have to invest in entirely new chucks or new accessories for your lathe thread sizes. Anti-rust coating surface Greatly extend the service life Extensive use The adaptors accept chucks, faceplates, and...- $26.99 USD
$26.99 USD- $26.99 USD
- Unit price
- per
-
M33X3.5 Female to 1-1/4" x 8TPI Male Thread Adaptor, Woodworking Lathe Headstock Spindle Adaptor with Two Nylon Washers.
The wood lathe thread adaptors enable you to use an insert system rather than have to invest in entirely new chucks or new accessories for your lathe thread sizes. Anti-rust coating surface Greatly extend the service life Extensive use The adaptors accept chucks, faceplates,...- $26.99 USD
$26.99 USD- $26.99 USD
- Unit price
- per
-
5/8" Shopsmith Female to 1" x 8TPI Male Thread Adaptor, Woodworking Lathe Headstock Spindle Adaptor with Two Nylon Washers.
The wood lathe thread adaptors enable you to use an insert system rather than have to invest in entirely new chucks or new accessories for your lathe thread sizes. Anti-rust coating surface Greatly extend the service life Extensive use The adaptors accept chucks, faceplates, and...- $26.99 USD
$26.99 USD- $26.99 USD
- Unit price
- per
Popular Products
NCK-4M 4" 4 Jaw Mini Self-Centering Chuck, Thread 1"X8TPI, with NCK-3.75Z-DJDD Dovetail Jaws, Wood Screw, Two Nylon Washers, T Handle Allen
- $52.99 USD
$52.99 USD- $52.99 USD
- Unit price
- / per
4 reviews
NCK-G3.75 3.75" 4 Jaw Key Self-Centering Chuck, Thread 1"X8TPI, with NCK-3.75Z-DJDD Dovetail Jaws, Wood Screw, Two Nylon Washers, T Handle Allen Key
Jaws are compatible with the chucks: Super NOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4.(All listed chucks require our NCK-JS8-M6 M6x12mm jaw fixing screws to be used) The tightening mechanism provides additional grip strength to the workpiece. The dovetail jaw...
- $69.99 USD
$69.99 USD- $69.99 USD
- Unit price
- / per
No reviews
NCK-3.75ZN Woodturning 3-3/4" Self Centering Chuck with 1”x 8 TPI direct thread, locking set screws for reverse turning
Brand BMWOOD Compatible Devices Lathe Thread Size 1”x 8 TPI direct thread Included Components 3-3/4" Self Centering Chuck, Dovetail Jaw and Woodworm Screw Jaws are compatible with the chucks: Super NOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4. Scroll chuck...
- $85.55 USD
$85.55 USD- $85.55 USD
- Unit price
- / per
No reviews
3-3/4" self-centering wood lathe Chuck - 1" small 8T pi direct thread mount/locking screws | reverse-turning safety | quick-change compatibility
NCK-3.75ZN/S1 Wood Lathe Chuck 3-3/4" Self Centering Chuck Set 1”x 8TPI Direct Thread with locking set screws for reverse turning Feature 1: Special Designed Bottom Jaw Jaws for the CK-3.75ZNS1 are compatible with the following chucks: SuperNOVA2, G3 Nova, Robert Sorby Patriot, Record Power...
- $165.95 USD
$185.95 USD- $165.95 USD
- Unit price
- / per
3 reviews
NCK-3.75Z-SJ Step Jaws for Woodturning Lathe Chuck
The NCK series jaws are designed for BMWOOD NCK series chucks NCK-3.75ZN, NCK-G3.75, NCK-4M and also compatible with the chucks: SuperNOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4. (All listed chucks require our NCK-JS8-M6 M6x12mm jaw fixing screws to be...
- $30.38 USD
$30.38 USD- $30.38 USD
- Unit price
- / per
No reviews
Sidebar
Recently Viewed Products
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
- Choosing a selection results in a full page refresh.
