-
NCK-3.75Z-WJ Wide Jaws for Woodworking Woodturning Lathe Chuck.
The NCK series jaws are designed for BMWOOD NCK series chucks NCK-3.75ZN, NCK-G3.75, NCK-4M and also compatible with the chucks: SuperNOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4. (All listed chucks require our NCK-JS8-M6 M6x12mm jaw fixing screws to be...- $33.99 USD
$33.99 USD- $33.99 USD
- Unit price
- per
-
CK-3.75Z-WJ Wide Jaws for CK-3.75Z Series Woodturning Lathe Chuck, Compatible with the Harbor Freight Bauer 23222A-B chuck
CK series Jaws designed for BMWOOD CK100 series Chuck are compatible with the Harbor Freight Bauer 23222A-B chuck completely, and also compatible with Vicmarc VM100, Record RP4000 but required our CK-JS8-M5 M5x12mm jaw fixing screws to be used.- $33.06 USD
$33.06 USD- $33.06 USD
- Unit price
- per
-
Woodlathe MT2 Centers set, Live Center 1-5/8" Dia and 4 Pronged Drive Center 1" Dia
MT1 and MT2 Center sets: LC5+DC2/MT2 Live Center 1-5/8" Dia + Crown Drive Center 1" Dia LC5+DC4/MT2 Live Center 1-5/8" Dia + 4 Pronged Drive Center 1" Dia LC5+DC2/MT1 Live Center 1-1/4" Dia + Crown Drive Center 1/2" Dia LC5+DC4/MT2 Live Center 1-5/8" Dia...- $32.99 USD
$32.99 USD- $32.99 USD
- Unit price
- per
-
CK-3.75Z-SJ Step Jaws for CK-3.75Z Series Woodturning Lathe Chuck, Compatible with the Harbor Freight Bauer 23222A-B Chuck.
CK series Jaws designed for BMWOOD CK100 series Chuck are compatible with the Harbor Freight Bauer 23222A-B chuck completely, and also compatible with Vicmarc VM100, Record RP4000 but required our CK-JS8-M5 M5x12mm jaw fixing screws to be used.- $30.38 USD
$30.38 USD- $30.38 USD
- Unit price
- per
-
NCK-3.75Z-SJ Step Jaws for Woodturning Lathe Chuck
The NCK series jaws are designed for BMWOOD NCK series chucks NCK-3.75ZN, NCK-G3.75, NCK-4M and also compatible with the chucks: SuperNOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4. (All listed chucks require our NCK-JS8-M6 M6x12mm jaw fixing screws to be...- $30.38 USD
$30.38 USD- $30.38 USD
- Unit price
- per
-
CK-3.75Z-RJTT Round Jaws for CK-3.75Z Series Woodturning Lathe Chuck, Compatible with the Harbor Freight Bauer 23222A-B Chuck.
CK series Jaws designed for BMWOOD CK100 series Chuck are compatible with the Harbor Freight Bauer 23222A-B chuck completely, and also compatible with Vicmarc VM100, Record RP4000 but required our CK-JS8-M5 M5x12mm jaw fixing screws to be used.- $30.13 USD
$30.13 USD- $30.13 USD
- Unit price
- per
-
NCK-3.75Z-RJTT Round Jaws with Tooth in Both Side for Woodlathe Woodturning Chuck.
The jaws are compatible with the chucks: SuperNOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4. (All listed chucks require our NCK-JS8-M6 M6x12mm jaw fixing screws to be used)- $30.13 USD
$30.13 USD- $30.13 USD
- Unit price
- per
-
3pcs set 4 Prong Drive Centre with Interchangable Centre Points for CK & NCK chuck series, Compatible with chucks Super NOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4.
Turn spindles without removing your chuck from the lathe using this four prong drive centre. The centre point insert is removable and can be replaced by a threaded pin or a blank 8mm diameter pin used for long hole boring which is also supplied....- $29.99 USD
$29.99 USD- $29.99 USD
- Unit price
- per
-
2" Wood Screw Chuck with Thread 1"x8TPI
2" diameter wood lathe faceplate,1" x 8TPI Thread, 0.4" thick steel faceplate. The lathe face plate features 4 screw mounting holes,equipped with 3 wood screws, making it quick and easy to install your workpiece securely. Experience reliable performance and a long service life with...- $29.99 USD
$29.99 USD- $29.99 USD
- Unit price
- per
-
Integrated 12” Tool Rest with 1”(25.4mm) Post with Length 80mm for WoodTurning Lathes.
These tool rests are an economical way of adding to your woodturning enjoyment. Sometimes a project comes along, which means the tool rest supplied with the lathe is either too long or too short. The tool rest gets in the way of the tailstock,...- $29.99 USD
$29.99 USD- $29.99 USD
- Unit price
- per
-
CK-3.75Z-6034 Pen Plus Jaws for Woodturning Lathe Chuck, Compatible with the Harbor Freight Bauer 23222A-B Chuck.
CK series Jaws designed for BMWOOD CK100 series Chuck are compatible with the Harbor Freight Bauer 23222A-B chuck completely, and also compatible with Vicmarc VM100, Record RP4000 but required our CK-JS8-M5 M5x12mm jaw fixing screws to be used. Solid, long design that the Pen...- $29.99 USD
$29.99 USD- $29.99 USD
- Unit price
- per
-
CK-3.75Z-PJ Pin Jaws for CK-3.75Z Series Woodturning Lathe Chuck, Compatible with the Harbor Freight Bauer 23222A-B chuck.
The Pin Jaws for CK-3.75Z Series Woodturning Lathe Chuck are compatible with the Harbor Freight Bauer 23222A-B chuck directly, and also compatible with Vicmarc VM100, Record RP4000 but required our CK-JS8-M5 M5x12mm jaw fixing screws to be used. These pin jaws have both a...- $29.81 USD
$29.81 USD- $29.81 USD
- Unit price
- per
-
NCK-3.75Z-PJ Pin Jaws for Woodturning Lathe Chuck
The jaws are compatible with the chucks: SuperNOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4. (All listed chucks require our NCK-JS8-M6 M6x12mm jaw fixing screws to be used) These pin jaws have both a compression and expansion grip, typically used...- $29.81 USD
$29.81 USD- $29.81 USD
- Unit price
- per
-
1"x 12TPI Female to 1" x 8TPI Male Thread Adaptor, Woodworking Lathe Headstock Spindle Adaptor with Two Nylon Washers.
The wood lathe thread adaptors enable you to use an insert system rather than have to invest in entirely new chucks or new accessories for your lathe thread sizes. Anti-rust coating surface Greatly extend the service life Extensive use The adaptors accept chucks, faceplates, and...- $28.99 USD
$28.99 USD- $28.99 USD
- Unit price
- per
-
Large Bowl Rest for Wood Lathe Tool Rest with 8.5” Diameter Curve M10x1.5 Thread
Bowl Rest System Small Bowl rest with 5.2" diameter curve, M10x1.5 thread Large Bowl Rest with 8.5” Diameter Curve M10x1.5 thread. "S" Bowl Rest with 8.5" and 5.2" diameter curves M10x1.5 thread. BRN-LC-M10 Large Bowl Rest with 8.5” Diameter Curve M10x1.5 thread. The bowl...- $28.99 USD
$28.99 USD- $28.99 USD
- Unit price
- per
-
4" Tool Rest with 1" Diameter 4" Length Post, Woodlathe Heavy Duty Round Bar Straight Tool Rest.
The tool rests feature a 2/5"(1CM) hardened steel rod as the tool bearing surface that provides smooth tool transition and will never ding, nick or need filing. Your hand fits comfortably in the radius of the rest, whether you use an overhand or underhand...- $27.99 USD
$32.99 USD- $27.99 USD
- Unit price
- per
-
M33X3.5 Female to 1"X8TPI Male Thread Adaptor, Woodworking Lathe Thread Adaptor with Two Nylon Washers.
The wood lathe thread adaptors enable you to use an insert system rather than have to invest in entirely new chucks or new accessories for your lathe thread sizes. Anti-rust coating surface Greatly extend the service life Extensive use The adaptors accept chucks, faceplates, and...- $26.99 USD
$26.99 USD- $26.99 USD
- Unit price
- per
-
M33X3.5 Female to 1-1/4" x 8TPI Male Thread Adaptor, Woodworking Lathe Headstock Spindle Adaptor with Two Nylon Washers.
The wood lathe thread adaptors enable you to use an insert system rather than have to invest in entirely new chucks or new accessories for your lathe thread sizes. Anti-rust coating surface Greatly extend the service life Extensive use The adaptors accept chucks, faceplates,...- $26.99 USD
$26.99 USD- $26.99 USD
- Unit price
- per
-
5/8" Shopsmith Female to 1" x 8TPI Male Thread Adaptor, Woodworking Lathe Headstock Spindle Adaptor with Two Nylon Washers.
The wood lathe thread adaptors enable you to use an insert system rather than have to invest in entirely new chucks or new accessories for your lathe thread sizes. Anti-rust coating surface Greatly extend the service life Extensive use The adaptors accept chucks, faceplates, and...- $26.99 USD
$26.99 USD- $26.99 USD
- Unit price
- per
-
3/4"X16 TPI Female to 1"X8TPI Male Thread Adaptor, Woodworking Lathe Headstock Spindle Adaptor with Two Nylon Washers.
The wood lathe thread adaptors enable you to use an insert system rather than have to invest in entirely new chucks or new accessories for your lathe thread sizes. Anti-rust coating surface Greatly extend the service life Extensive use The adaptors accept chucks, faceplates, and...- $26.99 USD
$26.99 USD- $26.99 USD
- Unit price
- per
Popular Products
NCK-4M 4" 4 Jaw Mini Self-Centering Chuck, Thread 1"X8TPI, with NCK-3.75Z-DJDD Dovetail Jaws, Wood Screw, Two Nylon Washers, T Handle Allen
- $52.99 USD
$52.99 USD- $52.99 USD
- Unit price
- / per
4 reviews
NCK-G3.75 3.75" 4 Jaw Key Self-Centering Chuck, Thread 1"X8TPI, with NCK-3.75Z-DJDD Dovetail Jaws, Wood Screw, Two Nylon Washers, T Handle Allen Key
Jaws are compatible with the chucks: Super NOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4.(All listed chucks require our NCK-JS8-M6 M6x12mm jaw fixing screws to be used) The tightening mechanism provides additional grip strength to the workpiece. The dovetail jaw...
- $69.99 USD
$69.99 USD- $69.99 USD
- Unit price
- / per
No reviews
NCK-3.75ZN Woodturning 3-3/4" Self Centering Chuck with 1”x 8 TPI direct thread, locking set screws for reverse turning
Brand BMWOOD Compatible Devices Lathe Thread Size 1”x 8 TPI direct thread Included Components 3-3/4" Self Centering Chuck, Dovetail Jaw and Woodworm Screw Jaws are compatible with the chucks: Super NOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4. Scroll chuck...
- $85.55 USD
$85.55 USD- $85.55 USD
- Unit price
- / per
No reviews
NCK-3.75ZN/S1 Wood Lathe Chuck 3-3/4" Self Centering Chuck Set 1”x 8TPI Direct Thread with locking set screws for reverse turning
Feature 1: Special Designed Bottom Jaw Jaws for the CK-3.75ZNS1 are compatible with the following chucks: SuperNOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4 Feature 2:Two sets locking holes for reversing running The design of the locking hole takes into...
- $185.95 USD
$185.95 USD- $185.95 USD
- Unit price
- / per
1 review
NCK-3.75Z-SJ Step Jaws for Woodturning Lathe Chuck
The NCK series jaws are designed for BMWOOD NCK series chucks NCK-3.75ZN, NCK-G3.75, NCK-4M and also compatible with the chucks: SuperNOVA2, G3 Nova, Robert Sorby Patriot, Record Power SC3, Record Power SC4. (All listed chucks require our NCK-JS8-M6 M6x12mm jaw fixing screws to be...
- $30.38 USD
$30.38 USD- $30.38 USD
- Unit price
- / per
No reviews
Sidebar
Recently Viewed Products
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
Example product title
- $19.99 USD
- $19.99 USD
- Unit price
- / per
- Choosing a selection results in a full page refresh.